The Markbass Mini CMD 121P is a bass combo amplifier that gives you fat sound with electric or acoustic basses. That makes the Mini CMD 121P amp perfect for rehearsal studios or small club applications. The Markbass Mini CMD 121P comes with a built-in Little Mark II bass head in the top rear area. Bassists will appreciate the Markbass-designed Vintage Loudspeaker Emulator and Variable Pre-shape Filter which help give this Mini CMD a warm natural sound. The Little Mark II also has a Neutrik Speakon combo jack output that accepts both Speakon or 1/4" speaker cable as well as a second 1/4" speaker out jack so you can hook up to another 8 ohm cab for a 500W rig. You'll also find a balanced XLR out, unbalanced tuner out so you can tune as you play without passing your signal through pedals. A Send and Return Effect loop protects you from losing your signal if one of your pedals dies or a cable in the chain gives out.
Impedance: 8 ohms
Speaker power handling: 400W RMS (AES Standard)
Frequency Response: 45Hz to 18kHz
Crossover Frequency: 3.5kHz
Sensitivity: 99dB SPL
Little Mark II head
Power
Input impedance: 500Kohm, max. voltage: 15 Vpp
Balanced Output (XLR): 22Kohm, max. voltage 25 Vpp
Effect Return impedance: 22Kohm, max. voltage: 25 Vpp
Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm
Voltage is factory preset for the U.S.
Controls
GAIN 80 dB to +23 dB range
MASTER VOLUME
GROUND LIFT: switch on rear panel
Equalization
LOW
Center frequency: 40Hz; level ±16dB
LOW MID
Center frequency 360Hz, level ±16dB
HIGH MID
Center frequency 800Hz, level ±16dB
HIGH
10kHz shelf; level ±16dB
VPF (Variable Pre-shape Filter)
center frequency 380Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250Hz20kHz (cut)
Outputs
EFFECT SEND
Unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
Unbalanced, max. voltage 25 Vpp
LINE OUT
Balanced XLR, max. voltage 10 Vpp
SPEAKER OUT
Speakon, 1/4"
Voltage is factory preset for Australia
