Hybrid-Shelled System. The combination of a maple/walnut bass drum and birch/walnut toms is our bold interpretation of today's modern drum sound. The birch toms deliver clear and punchy sounds in the high register while the maple kick produces a warm, round tone in the low end. The result is a redefined sonic identity that speaks to today's music scene.

FEATURES:

• The Natural Satin SAS Finish brings out the beautiful character of the woods used in the drums but also allows the shell to vibrate fully due to its extremely low-mass application. Thicker finishes like high-gloss add mass to the shell and shorten sustain. Future Design Lab models may employ a thicker finish to create a more focused sound. 
   
• The revolutionary new "Halo" mount featured on all Saturn Evolution toms, unlocks the freedom of full resonance. Using a lateral, unique "under lug-line" suspension system, this new groundbreaking isolation mount allows the shell the freedom to have an open, pure tone. This is done with minimal stiffness usually associated with under hoop mounting systems.
   
• With the rubber gasket inside the mount, you can screw the knob down fully to dampen the shell resonance for a shorter decay, or back it off for a wide, open tone. In the studio, this allows you to "Pre-EQ" your drums before feeding them into your plug-ins.
   
• First introduced as a special edition in 2012, the Birch/Walnut hybrid shell has made its return to the Saturn Evolution line with Design Lab features. The new shell formula perfectly combines the sonic characteristics of walnut with articulate punch of birch, delivering a Dark, Punchy, Dry sound.
   
• Plies get progressively thicker, depths graduate by 1/2”, and bearing edges change as the drums get larger in diameter. The combination of all of these details creates an amazing symphony in one kit, where each and every drum sounds perfect!

SPECIFICATIONS:

• Mounting System:
  Hybrid-Shelled System
   
• Shell:
  Maple and Walnut Hybrid Shell
   
• SAS 0-1 (PD, PM, PA, PG, PQ, PI, PB)
  8-Ply, 7.5mm, 10 Toms
  8-Ply, 8.2mm, 12 Toms, and Floor Toms
  8-Ply, 8.9mm, Bass Drum
   
• SAS 2 (MZ, OE, PO, PT, PZ)
  9-Ply, 7.85mm, 10 Toms
  9-Ply, 7.85mm, 10 Toms
  9-Ply, 9.25mm, Bass Drum
   
• Shell Hardware:
  Chrome Hardware
   
• Hoops:
  Mapex Sonic Saver Hoops
   
• Mapex SONIClear™ Bearing Edge:
  45° on Toms, and Floor Toms
  60° on Bass Drum.
   
• Air Flow Venting:
  2 Vent Holes on Toms and Floor Toms
  4 Vent Holes on Bass Drum.
   
• Floor Tom Legs:
  SAS Static 90 Degree Floor Tom Legs
  Sonic Pedestal Floor Tom Feet.